Tag Archive for: alarm and detection

What is a Monitored Fire Alarm System?

, , , ,
Fire Alarm in Building

The U.S. Fire Administration estimates that fires in commercial buildings cost owners over $2.4 billion per year. Wowza! This considered, monitored fire alarm systems are essential in the prevention of fires in commercial buildings.

Moreover, fire alarm systems can help to:

  • Reduce damage to property
  • Protect valuable assets
  • And, save lives

But today, we have to ask: Is a regular fire alarm system enough?

OK, OK… Before you roll your eyes, hear us out. Fire alarm systems are an excellent and crucial first step in protecting your property. However, as a property owner, you may be able to do more!

A monitored fire alarm system can help to further prevent or reduce costly damage to your property while also better protecting its residents.

Read on to learn what a monitored fire alarm system is and how it can better protect your property.

What is a Monitored Fire Alarm System?

A monitored fire alarm system is an alarm system that has been programmed to transmit signals to a central station or fire control center. In simple terms, when the alarm goes off, the system will immediately alert an operator who will dispatch the appropriate fire protection team to your building.

A monitored fire alarm system ensures that the fire department is alerted to the fire as quickly as possible, without someone having to make the call. The seconds or minutes that a monitored fire alarm system might save you could make the difference between life and death (as dramatic as it sounds, it’s true!)

Monitored fire alarm systems are most commonly used in commercial facilities—and for good reason.

What is the Difference Between a Fire Alarm System and Fire Alarm Monitoring?

A fire alarm system sets off an alarm—usually a series of local, audible devices—to alert people in the building that a fire has been detected and to evacuate immediately. A fire alarm system does not notify the fire department of the detected fire. The fire department will not be dispatched unless someone calls 911.

On the other hand, a monitored fire alarm system will transmit a signal to a central station or fire control center where an operator will dispatch the appropriate fire department to your building—without anyone in the building calling 911.

How Does a Monitored Fire Alarm System Work?

A monitored fire alarm system has an installed control panel that will detect a fire and immediately transmit a signal to a monitoring station. The operator at the station will notify the fire department when they receive the signal. 

 

Signals can be transmitted via:

  • Cell phones
  • Phone lines
  • Radios
  • The internet

Why Does My Building Need a Monitored Fire Alarm System?

The answer to this is simple: Monitored fire alarms buy you, at the very least, a few extra minutes. In the case of a fire, a few extra minutes can be the difference in both saving buildings and saving lives.

In as little as thirty seconds, a fire can double in size, according to the U.S. Fire Administration. Additionally, a fire will spread even quicker if its surroundings are flammable, such as products that may be found in a warehouse or particular furniture.

If your building is equipped with a fire alarm system that isn’t monitored, the fire department will only be dispatched when someone manages to call 911 after sounding alarms, a fire suppression system or sprinklers, and a quick evacuation of all residents.

Considering these stressful protocols, how quickly do you trust your residents to call 911?

When Will the Monitored Fire Alarm System Protect My Building?

Monitored fire alarm systems provide 24-hour protection, seven days a week. 

For instance, even if a fire occurs at nighttime or while your building is unoccupied, a monitored alarm system will ensure there is no delay in notifying the fire department.

How Do I Know If My Fire Alarm is Monitored?

A common error amongst commercial building owners is incorrectly assuming their fire alarm systems are monitored. Consequently, when a fire occurs, the call to 911 is severely delayed. This error leads to the destruction of the buildings that might have been saved if the proper precautions had taken place.

At VFS Fire & Security Services, we urge you not to wait until a catastrophic loss to have your system inspected.

The default option for many fire alarm systems is the installation of a single-station fire alarm, which doesn’t include the feature of sending a signal to the fire department.

If you’re not sure if your fire alarm system is monitored, you can have a fire and security service quickly inspect your system to let you know. At VFS, our system upgrades team can review your existing plans and make scalable proposals to meet your building, code, safety needs, and budget. 

Not sure if your building is due for an inspection? Read our complete guide to fire and safety inspections for your facilities.

The Bottom Line

Fires happen often—every 63 seconds, in fact. This considered, commercial property owners should be adequately prepared to avoid the costly damages to their valuable assets and protect their residents.

Monitored fire alarm systems are a strong method of improving the protection of your property and its residents by ensuring the fire department is dispatched as quickly and efficiently as possible.

Don’t wait until it’s too late. Start a conversation with us today and let’s figure out how to best protect your building.

How Often Should Fire Protection Systems Be Serviced?

, ,
fire protection systems service and maintenance

… Yeah That’s Something You Have To Do

Just because your building has the proper safety equipment doesn’t mean your work is done. Believe it or not, you have to actively maintain each of the devices throughout the year. After all, you have to change the oil in your car – your building’sfire protection system service and maintenance fire protection systems are no different.

How often you service or inspect your fire protection services depends on the device. Some require weekly, monthly, semi-annual, or annual inspections. Hot tip- all fire and life safety systems require at least an annual inspection. Let’s discuss how often different fire protection systems need servicing.

Fire Protection Maintenance and Inspection Schedules

Fire protection maintenance schedules are set in place to make sure your fire protection is up to par in the event of a fire. A fully functioning system reduces the risk of damage or injury.

Typically, a fire marshall or other authority holding jurisdiction (AHJ) will review your fire protection system to review if the system is up to code. Local regulations determine how the frequency of service for your different systems. There are, however,  overarching trends as to when each needs a look.

Fire Sprinkler Systems

The best practice for a fire sprinkler system is to perform quarterly and annual sprinkler inspections. Particularly in colder areas, regular maintenance and inspections are essential.

For example, a wet pipe sprinkler system needs to be kept at above freezing temperature during the colder months in order to prevent costly damage to the system.

Fire Suppression Systems

Fire suppression systems include extinguishing fires through gaseous chemical or foam agents instead of water. Examples of fire suppression systems include:

  • Clean agent
  • CO2 Systems
  • Wet chemicals

They must be inspected on a semi-annual basis according to NFPA guidelines.

Fire Alarm & Detection

Fire alarms or smoke alarms should be inspected by a professional on an annual basis- at a minimum.

Inspect these systems for leaks, cracks, warning lights or obstructions weekly. Local rules and regulations determine the service timeline.

For example, school buildings typically require periodic testing of fire alarm systems and regular fire drills.

Fire Extinguishers

A fire extinguisher, also known as the first line of defense is a piece of fire safety equipment you want operable at any given moment. Inspections must take place once a month.

Devices prone to rust, impact, or tampering require the most frequent inspections.

Their external maintenance examination occurs annually during the hydrostatic test, or when specified. Internal fire extinguisher tests occur every 1 – 6 years depending on the extinguisher.

A Final Word

Keeping a well-maintained fire protection system can be the difference between minor and major structural damage. It can also save lives. Proactively maintain your system to have the peace of mind that if the time comes, your building is fully prepared.

Most building owners find that waiting on the fire inspection report is often the most painstaking part of the process. Why do these reports take so long? Take a look at one of our recent articles explaining why the fire inspection report takes so long.

What to do in case of an Oil Fire (If you have time to Google what do I do in case of an oil fire you can clearly run and type at the same time very well– More power to ya!)

, ,
What to do in case of an Oil Fire

It’s fire season. 

There are standard fire precautions that are taught since middle school. Unfortunately, “Stop, drop, and roll” isn’t enough to do if there’s an oil fire. 

What is an oil fire?

There are different classifications of fires. UCLA Health lists an oil fire as “Class B.” This includes, “Flammable liquids such as alcohol, ether, oil, gasoline, and grease, which are best extinguished by smothering.” 

An oil fire often starts in commercial kitchens, areas where spontaneous combustion can occur, or areas where hot work is done. 

VFS specializes in Kitchen Hood Suppression Systems. Kitchen systems are essential to the safety of a commercial kitchen and the people that work within it. These systems release wet chemical extinguishing agents designed to put out the unique components of cooking fires.

As soon as the system is activated the gas line to the appliance will immediately be cut off depriving the fire of fuel and the chemical agents will be released covering the flames and depriving them of oxygen. It is much less expensive to invest in a commercial kitchen suppression system than it is to repair structural damage after a fire occurs. 

What to Do

DON’T USE WATER. I REPEAT, DO NOT AT ANY COST USE WATER. 

This can cause the flames to grow even faster. The goal is fire suppression —  so try and smother the flames with a towel or fire blanket if it is safe to do so. Another option that will work is fire extinguishers. Having these tools (especially fire extinguishers) accessible throughout your commercial building is key to fire safety and fire protection.

If the fire is not smothered successfully, RUN! 

Seriously, this could grow fast and is a danger to all your employees. There are ways to prepare for this so that the worst outcome doesn’t happen.

Preventatives

If your commercial building doesn’t have a hot work permit, you’re at a greater risk. A hot work permit guarantees that safety measures have been addressed and implemented throughout your commercial building. This means that your building and employees are prepared in case of an emergency. 

As mentioned above, having fire extinguishers or fire towels around commercial kitchens and hot work zones is important. 

Learn how to Suppress Fires, not Feelings here! —

What is a Public Safety DAS? NFPA, ERRCS and AHJ (Plot Twist, these letters actually mean something…)

, ,
What is a Public Safety DAS? NFPA, ERRCS and AHJ (Plot Twist, these letters actually mean something...)

You’re not alone if you see all the abbreviations in fire safety and think, “How the h*ll am I supposed to know what that all means?” 

DAS Explained

The amount of NFPA codes is a large number (like large as in over 300…), so we understand it’s hard to keep track of them all! Actually, are you trying to test your knowledge? Take our NFPA Fire Codes quiz and see how you do! 

Anyways, DAS stands for, “Distributed antenna system.” And no, we don’t mean the antenna for your cable TV.

The NFPA requires that “Buildings and structures that cannot support the required level of radio coverage shall be equipped with a radiating cable system or a distributed antenna system (DAS) with FCC-certified signal boosters, or both, or with a system that is otherwise approved, in order to achieve the required adequate radio coverage.” 

There are additional factors of the distributed antenna system that any commercial property owner should consider (based on NFPA standards). This might include:

  • Signal Strength
  • Isolation
  • System Radio Frequencies
  • Frequency Changes
  • Critical Areas
  • Radio Coverage

Another main component of NFPA 72 Section 24.5.2 is non-interference. 

In other words, “no amplification system capable of operating on frequencies or causing interference on frequencies assigned to the jurisdiction by the FCC shall be installed without prior coordination and approval of the authority having jurisdiction,” according to the NFPA. “The building manager/owner shall suspend and correct other equipment installations that degrade the performance of the public safety radio system or public safety radio enhancement system.” 

Let’s Talk ERRCS

So surprise, ERRCS is one in the same as DAS. An Emergency Responder Radio Communication (ERRCS) is crucial to have in commercial buildings. An ERRCS can also be identified as a Public Safety or First Responder DAS. 

It turns out all of the fire protection abbreviations can be interchangeable!

How About AHJ?

AHJ, the last acronym to understand for today’s lesson! AHJ stands for, “Authority Having Jurisdiction.” It can be a common misconception that the local fire marshall is responsible for any updates in fire safety. But this is not the case. Oftentimes there are multiple people or authorities who have jurisdiction and are responsible for a facility’s fire safety standards and practices.

The NFPA has regulations set under Code 70E: 

“In a commercial or industrial facility, subsequent installation of electrical equipment or modification of the distribution system is often not done under a government permit nor is this inspected by the government AHJ.” 

A good question to keep in mind listed from the NFPA is, “Does your management invite a government AHJ to inspect and approve the installation of a new subpanel, the move of a production line, the retrofit for a breakroom, the extension of a circuit, or the addition of a backup generator in your facility?”

Have more questions about these confusing acronyms? Reach out to VFS Fire & Security Services today! 

What is a Public Safety DAS? NFPA, ERRCS and AHJ (Plot Twist, these letters actually mean something...)

What is a Public Safety DAS? NFPA, ERRCS and AHJ (Plot Twist, these letters actually mean something…)

Emergency Lights and Exit Signs Deserve Love and Attention, too!

Emergency Lights and Exit Signs Deserve Love and Attention, too!

Although they are sometimes overlooked, emergency lights and exit signs actually should fall into regular fire safety maintenance rhythms. It’s actually a National Fire Protection Association (NFPA) fire safety requirement to keep up-to-date emergency lights and exit signs. So, stay up-to-date and understand NFPA 101.

The code states that “emergency illumination shall be provided for a minimum of 90 minutes in the event of failure of normal lighting. The illumination must not be less than an average of one foot along the path of egress at floor level.”

Here’s what giving some love and attention to your overlooked exit signs and emergency lights might look like.

Emergency Lights and Exit Signs Deserve Love and Attention, too!

Testing

Since there are clear NFPA codes in place, there are guidelines to follow for annual inspections and emergency protection. Professionals are trained to know what to look for when it comes to emergency illumination.

There are a few steps you can take in your commercial building to ensure that your inspection goes as smoothly as possible. For one, make sure all emergency exit signs are easily accessible for the fire safety professional. 

This means making sure that the area surrounding the emergency illumination is free of obstructions for full access. For monthly inspections, some emergency exit signs have test buttons that can easily be pressed with the help of a ladder. Again, each commercial and educational building will have a different setup and might require specific inspections and maintenance. 

Red flags to look for while testing includes dull lighting, light bulbs that have blown out, and flickering. Overall, there is an emergency light combo that will work for your commercial building.

What Could Go Wrong?

If you fail to have your emergency lights and exit signs checked monthly (or at least annually), lives could be at risk. These systems are essential to guiding occupants out of a building in an emergency situation.  If the equipment in your commercial building malfunctions during an actual emergency, there is a huge liability risk. Fire prevention is our specialty, so connect with us to learn more about annual inspections.

We tell you what’s due when it’s due, and why it’s due. At VFS, we constantly communicate with your team to keep you up-to-date on the latest information within your facilities.

Learn more on our updated website today! 

 

HOW MESHWRX CAN PROTECT YOUR BUILDING

,
meshwrx_post p2

LANDLINES ARE SO 1987… HOW MESHWRX CAN PROTECT YOUR BUILDING AND BRING YOU INTO THE 21ST CENTURY

Implementing Mesh technology into your building is like getting your first cell phone for your birthday. Gone are the days of landlines, and dial-up internet. Mesh technology is designed to ensure your alarm systems run efficiently and effectively. 

HOW CAN MESHWRX HELP YOUR BUSINESS RUN SMOOTHLY?

As a building owner, property manager, or facility manager, one of your main goals is to ensure your property runs smoothly and effectively. To simplify your life, MeshWrx is the most reliable, cost-efficient, and hassle-free alarm monitoring solution. 

ONE OF OUR CLIENTS, WITH 101 SYSTEMS IN PLACE HAS SAVED $218,160 IN JUST THE FIRST YEAR!

Mesh network technology was designed as a means for the demanding military communication pathways. Today these mesh networks are still trusted by military, fire, and police departments, and can be extremely effective at managing your building’s fire safety.

WHAT ARE THE BENEFITS OF MESH TECHNOLOGY?

YOUR CURRENT SYSTEM IS COSTING YOU A SMALL FORTUNE, UNLESS IT’S MESHWRX, THAT IS!

Monthly costs for telephone lines are increasing as quality and reliability are decreasing. The increase of service calls and time spent tracking down potential issues create additional costs when using these outdated systems. Cellular and IP may require long-term contracts and regular upgrades in equipment costs, as technology changes. 

When landlines, cellular, and IP fail, MeshWrx is there to help. In Houston TX, Hurricane Harvey hit knocking out landlines, cellular, and IP. Mesh technology was the only avenue of communication that survived through the devastation.

With MeshWrx, the cost of expensive phone lines, and upgrades are mitigated, This technology has also been proven more reliable. 

100% UPTIME

When users are added to traditional systems, like cellular and IP systems, the response time slows and can sometimes even drop. The MeshWrx system performance is quite the opposite. The radio-mesh network technology creates multiple paths for emergency signals to reach first responders. The self-configuration and smart routing results in 100% uptime!

NO UPGRADES NEEDED!

The technology bandwidth increases with cellular and IP, their equipment becomes obsolete over time. With MeshWrx, once installed- fawgehtaboutit. No, but really, forget about it! Mesh technology doesn’t require upgrades.

RELIABILITY AND FAST SIGNAL TRANSMISSION SPEED

Tower-based and single-route systems are not nearly as reliable as mesh technology. With environmental disturbances and equipment problems, your alarm systems need multiple signal paths to function effectively. MeshWrx is resistant to these disturbances, as it continually optimizes multiple signal paths. 

Mesh networks were originally designed for military communication pathways due to their reliable connection. Today, these networks are still trusted by military, fire, and police departments. 

The reliability of these systems is due to their fast alarm signal transmission speed. Mesh communicates alarms in less than 3 seconds. Whereas, telephone lines, cellular, or IP can take up to 45-60 seconds. Because of this, the mesh technology is the fastest alarm signal and safest choice for your properties. 

Mesh technology systems are systems put in place to ensure the safety of your building and the people inside. Ensuring you have the best and most effective systems in your building is essential. Contact us today to learn more! 

4 REASONS TO INVEST IN FIRE PROTECTION SERVICES TODAY.

, , , , ,
4 REASONS TO INVEST IN FIRE PROTECTION SERVICES TODAY.

Many business owners choose not to invest in fire protection services to cut costs and improve their bottom line. However, these business owners may not realize that the scope of fire protection goes beyond the event of a fire itself. In fact, fire protection services benefit businesses long before and well after an incident occurs.

Read on to learn how investing in fire protection services can protect your business and employees, cut insurance costs, and help your company survive business interruption and make a successful recovery. 

Keep Your Business and Employees Safe 

The most important reason to invest in fire protection service is to keep both your business and your employees safe. 

Protect Your Business

Any fire can devastate your business. Small fires may damage your property enough to halt business operations for a few days. Large fires may result in the complete loss of your building, materials, merchandise, important documents or records and, in the worst cases, harm an employee or customer. 

Each of these outcomes also carries major financial risk. Investing in fire protection services can help to reduce this risk and protect the business you worked so hard to build. 

Protect Your Employees

According to OSHA, “businesses operate more efficiently when they implement effective safety and health management systems.” 

Employees play an essential role in supporting your business. By making them feel safe and protected in their workplace, you are helping them to be more productive as well as treating them with the care they deserve. Your business is their livelihood and protecting it is not just about protecting your assets, it’s about protecting them too. 

Be Prepared to Survive Business Interruption

Over 70% of businesses that experience a major fire either never reopen or close within three years of the event. 

The high percentage of businesses that fail following a fire is largely due to the intensity of business interruption fires cause. If you are well-equipped to handle a major fire, you will be better prepared to survive business interruption. The 30% of businesses that survive fires likely recover because they had plans in place before the event occurred. 

Mitigate Risk For Insurance Purposes

Insurance companies assess your potential risk when determining the cost of your coverage. 

The cost of fire safety is a drop in the bucket compared to the cost of recovering from a fire and subsequent increases in insurance premiums. Therefore, it is important to have all the precautions in place to reduce any potential risk. Additionally, fire safety services can help your business avoid potential workers’ compensation payments.

Reduce Liability Risk

Business owners can avoid potential liability by investing in proper fire safety insurance. If owners do not comply with regulations or keep their building up to code, they are vulnerable to potential liability. The best way to keep yourself and those in your building safe is to invest in high-quality fire protection.

How to Invest in Fire Protection Services

Business owners have a range of fire protection services to choose from to protect their businesses and employees. For example, fire safety services and solutions may include: 

  • Fire sprinkler systems
  • Fire suppression systems
  • Fire alarm and detection systems
  • Portable fire extinguishers
  • And more

At VFS,  we want to help protect your employees, your company, your assets, and your building from any potential fire risk. 

Contact us today to learn more about our services and see how we can help.

Read on to learn the difference between fire protection and fire prevention, here.