The long answer is that we can help you understand the factors that will influence the cost of a fire alarm system for your commercial property! Let’s get started.
What to Consider
Depending on your property, each of these factors could require different levels and types of fire alarm systems. A good rule of thumb to follow is understanding that the larger and more complex your facility is, the more you will need to invest in your fire protection systems to keep everyone safe in case of an emergency.
Size of Building
Yes, the cost of a fire alarm system for Knottsberry farms is going to be different than the tiny mom and pop shop on the corner.
In general, a good rule of thumb to follow is the larger your building, the higher the cost to keep everyone safe in case of an emergency. If the building is older, there will most likely be obstacles for a fire safety crew (like VFS!) to work with.
Additionally, if there are special system preferences and repairs, the cost will reflect this.
Types of Facilities
The cost of your fire alarm system depends greatly on the environment. Below are some of the more complex environments that may require a little more fire alarm TLC:
Manufacturing & Testing Facilities
What Are You Storing?
Another big factor in cost depends on what contents you are storing within your facility. More complex environments usually mean high hazard equipment or contents such as:
Spray Painting Equipment
Fire season is in full swing. As a result, fire safety costs and insurance is going up in price! This can be a factor in how expensive a fire alarm system will cost. This can be another factor in the cost of your fire protection.
There are different aspects that will contribute to the cost of a fire alarm system like:
Where is it?
How big is the building?
Depending on these factors, additional monthly fees could apply.
Looking for more specifics about your commercial or educational building? Reach out to VFS Fire and Security Services today to learn more information. For more on the different fire sprinkler systems available to you, read on here. (Psst! Fire suppression and fire sprinklers are not the same!)
https://www.vfsfire.com/wp-content/uploads/2021/09/iStock-1130392721.jpg14142121kelseyhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngkelsey2021-10-10 14:50:452021-09-28 13:20:35How Much Does a Fire Alarm System Cost?
Commercial kitchens should be at the top of the priority list for fire safety management.
Educating your employees on proper fire safety protocols is essential to ensure their workplace safety. In order to keep them safe from harm, they need to know what steps to take in the event of a fire—and no, ‘fricken large ones’ is not correct. In an effort to help guide your fire safety training endeavors, we’ve put together a few tips to improve your employees’ education surrounding building fire safety.
Start With Necessary Information
We think it’s safe to say that most employees do not want to sit through a three-hour-long fire and life safety training. To start, ensure you’re touching on all the ‘need to know’ topics of fire safety.
As you dive deeper into fire safety training, you can go over additional topics that may not be as urgent. Urgent topics to review and discuss should include:
Types of fires that occur in the workplace
How to extinguish the different types of fires that may occur
Major causes of fire accidents in the workplace
The exits are available to employees in case of emergency
Make sure your employees know the various hazards in your workplace.
The National Fire Protection Association (NFPA) claims that the main cause of fires in office buildings is cooking equipment. Office and commercial buildings typically have cooking equipment. Whether there is a mass amount of equipment or one small kitchen for employees, there are safety measures that should be taken as a part of fire prevention.
A few of these safety measures include:
Clean Grease Often
The office kitchen isn’t known for being the cleanest place to cook food, and grease build-up can cause fires to spread quickly.
Ensure Equipment is Maintained Regularly
Old equipment increases fire risk and puts employees and the building property at risk. There are specific commercial kitchen requirements that may apply to an in-office kitchen.
The precautions withgas-fired appliances include being installed by professionals, no oil with gasoline, and only specific locations within the building containing gas-fired appliances.
Kitchens are typically protected by et chemical suppression systems. These Extinguishing methods are specific to the type of cooking fires that may occur in a commercial kitchen. When triggered, the system discharges immediately with a liquid that, when sprayed onto the fire, cools the flames almost instantaneously.
When this liquid comes into contact with oils and fats it creates a foam, subsequently cooling the affected area and preventing the spread from reigniting.
At VFS, your building’s safety is our top priority. With over 25 years of experience, our fire and life safety experts are prepared to ensure your building remains safe from harm.
The equipment we install, inspect, and maintain is only one component of your fire and life safety initiatives. The other aspect includes employee training! Your employees must be educated on what to do in case of an emergency.
https://www.vfsfire.com/wp-content/uploads/2021/05/iStock-613655646.jpg14142120The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-09-26 16:40:232021-09-27 14:35:45Kitchens: More Than a Place to Steal Your Coworker’s Lunch!
Maybe you’re on the fence about hiring VFS. Maybe even wondering, “How would VFS go about onboarding my company into fire protection services?”
We offer a wide variety of services, so here’s a timeline of our involvement, and remember, we partner with you from START TO FINISH (not an exaggeration).
Since you’re on our website, odds are you need help with fire protection services. This is a smart move for you as we approach fire season. Great news, you’ve already completed the first step! By simply showing interest in protecting your commercial property and employees.
Yes, you read that right. A FREE consultation, a hard offer to pass up. Click here to schedule your consultation today. It’s as simple as having a quick conversation with one of our fire protection experts to identify your unique needs.
Who We Serve
No matter the industry, VFS has you covered. From our dispatch team to our field technicians we are equipped with a full staff of fire protection experts and a robust knowledge of each specialized environment. We are constantly staying up to date on emerging trends in technology as well as new requirements and code changes to keep you informed and in compliance. Here are some of the markets we help to protect:
Industrial & Manufacturing
Oil & Gas
Once we’ve decided that our companies will be a great fit as partners, it’s time to get down to the nitty-gritty. We offer a variety of services for all of your fire protection systems including the following:
Service & Repair
Testing & Inspection
Just to name a few.
How We Help
At VFS we believe in a proactive business model. We manage the who, what, why and where of your fire protection assets and their inspection and maintenance schedule. It is essential to stay on top of your fire protection systems to prevent any potential accidents or costly repairs.
Our advanced platforms and highly trained dispatch team allow us to manage inspections and testing from inception to execution. We tell you what’s due, when it’s due and why it’s due, and are constantly communicating to your team to keep you up-to-date on the latest information within your facilities. Fortify your building with reliable fire protection systems inspected and maintained by the experts at VFS
Once we help you decide which of our services are right for you, it’s go time. Visit the VFS website today for more information on becoming a partner.
https://www.vfsfire.com/wp-content/uploads/2021/06/iStock-495343052-scaled.jpg18072560The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-07-25 14:33:002021-07-19 16:31:04VFS is your partner from start to finish: A walk-through of the onboarding process
This means hot weather, dry winds, and perfect conditions for a fire that could destroy your property.
Duh Duh DUhhhh!
Fire season is scary and unpredictable, but don’t worry, VFS is here to help prepare your commercial property for an emergency. Fire safety regulations for a commercial building can look differently depending on the property.
VFS offers systems from video surveillance to business intelligence. This means that if a fire starts, your company will have access to visuals around the property. We design systems that optimize your existing infrastructure and augment them with the latest in proven technologies.
Adding this extra layer of security is just a stepping stone towards having a foolproof plan in place for fire season.
Outside the Building
The surrounding area of any property should be cleared of extra brush and dead plants. This includes trees, shrubs, bushes and dead grass. Another good rule of thumb to follow is to make sure any tree branches stay at least 10 feet from any other trees.
The area outside the building needs to be free of flammable materials is also known as a ‘buffer zone.’ This buffer zone would help slow down the pace of the fire.
Another hazard to be aware of is gutters. The key is to maintain a consistent routine of cleaning out the building gutters to avoid build-up of dry leaves and other highly flammable materials.
The parking lot is another focus area for fire prevention. Depending on the commercial building layout, parking lots can become a hotspot for sparks to fly. To avoid this, inform your staff that they need to avoid parking over any grass or spilled oil.
Inside the Building
Aside from video surveillance, there are other steps you can take to ensure your commercial building is prepped for fire season.
Any vents throughout the building should be cleaned consistently because they are highly flammable. There are metal vents that can be added that would act as a temporary barrier between embers and vent.
An evacuation plan is something that should be perfected and taught to all employees. Performing practice drills with your company will ensure everyone understands their role in the event of an emergency.
Remember, VFS Fire & Security Services take you from idea to operations and everything in between. Schedule your free expert consultation today, and get prepared for the dreaded fire season.
https://www.vfsfire.com/wp-content/uploads/2021/06/iStock-1318212900.jpg13792174The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-07-18 14:14:002021-07-19 13:45:16Prepping your commercial property for fire season! (Yes, you need to)
Owning a commercial building comes with a lot of responsibilities — that doesn’t mean you should slack on simple inspections.
VFS believes that your fire protection systems are only as effective as the inspections on them.
According to the National Fire Protection Association (NFPA) code, quarterly and yearly inspections of your fire and life safety systems are mandatory. In addition, some components of a system, like a fire pump, require weekly and monthly inspections.
It is best to consult your VFS Account Executive for details. Having your building inspected by trained and certified inspectors will help keep your safety systems in good working order.
Hot Inspection Tips
Annual inspections are required for all fire and life safety systems. But, once a year isn’t the best option for overall safety of employees and the buildings.
Some systems or components of a system may require more frequent inspections like monthly or quarterly.
Inspectors should be certified by a nationally recognized organization.
Inspectors should wear company clothing or nametags identifying them as professionals authorized to be in the building.
Your inspection reports should deliver the following information:
Location of every device in building
Whether each device passed or failed inspection and why
Date/time stamp when each device was inspected
Device inventory & warranty status
Indication of length of time devices have been in service
Verification of report results
Detailed inspection reports are excellent supporting documents for insurance companies or authorities having jurisdiction (AHJs).
Make sure your employees or building tenants are aware of a scheduled inspection 24 hours in advance.
For Fire Alarm Systems, audio/visual testing may interfere with trainings, meetings or site visits.
Let inspectors know of any construction or remodeling, and additions or problems to the fire protection systems in your building since the last inspection.
We tell you what’s due, when it’s due and why it’s due. At VFS, we constantly communicate with your team to keep you up-to-date on the latest information within your facilities. Fortify your building with reliable fire protection systems inspected and maintained by the experts at VFS!
https://www.vfsfire.com/wp-content/uploads/2021/06/iStock-1203982701.jpg14332093The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-07-11 16:26:002021-07-12 14:03:00Get it together and inspect your building more than once a year!
The sun is out, the air smells like sunscreen and … summer school!
School buildings provide an important space for youth and educators, so there is great risk if there is no evacuation plan in place.
Seems overwhelming? Don’t worry, the best part is that we do the work for you!
There are other outlier factors that need to be considered while creating a solid evacuation plan. National Fire Protection Association (NFPA) provides some startling facts about fires that start in school buildings:
“School fires most often originated in a lavatory or locker room
Fires that were intentionally set were the leading cause of school fires, accounting for almost two of every five fires
Two-thirds of school fires occurred between 8 a.m. and 4 p.m.
In 2014-2018, the U.S. fire departments responded to an estimated average of 3,230 structure fires in schools each year
These fires caused annual averages of one civilian death, 39 civilian injuries, and $37 million in direct property damage.”
Since most fires start in locker rooms and bathrooms, the evacuation plan must be centered around those geographical locations. This will look different for each educational building based on the layout of the property.
Draw a Floor Plan
When making a blueprint of the building, highlight exits and other fire safety tools (think fire hoses, extinguishers, and emergency phones). Make sure all staff know this plan inside and out, so in case of an emergency everyone’s prepared with the evacuation plan.
Cluing in students at an educational facility is also important to successfully follow through an evacuation plan. Assemblies and test fire alarms are a great way to start.
Another option is to have posters around the educational building with reminders of fire safety tips and what to do in an evacuation. Some of these may include:
Don’t use the elevator, always choose the stairs
Never go back into the building unless given permission by authorities
Call 911 as soon as possible
Always leave through the nearest exit
Leave your personal items behind
We protect property and lives, while providing a sense of security and peace of mind.
VFS is here to help you improve your fire safety plan in educational buildings, find more on our website.
https://www.vfsfire.com/wp-content/uploads/2021/06/iStock-1221366089.jpg13412235The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-07-04 15:51:002021-07-12 14:02:46It’s summer vacation … but not for you. Get your fire safety up to par
Preventative fire and life safety system maintenance can save your building costly repairs. More importantly, it can keep your people safe from faulty equipment accidents.
Why does your building need preventative maintenance inspections?
Your building occupants’ safety and wellbeing is your top priority as a building owner. Fires and other incidents are unpredictable, but you should prepare for the possibility they do occur. In order to stay properly prepared for emergencies, regular fire system inspections are essential. You need to know when your systems are faulty, in order to fix them before potential emergencies occur.
The National Fire Protection Association, your local authorities who have jurisdiction, and the International Code Council implement fines for not following inspection standards. Fines and penalties, however, are the least of your worries if your alarm, sprinkler, or fire suppression systems don’t work when you need them.
How else can fire system inspection help your business?
With ongoing fire preventative maintenance, you create a safer work environment for your employees. Your employees won’t fear the danger of a fire breaking out in the office, because your systems will be running efficiently and effectively. Because of this, your employees, visitors, and customers will have a greater sense of security.
Your employees will also be able to be more productive. Not to mention, avoiding costly long-term losses and limited operations in a building that has experienced fire.
Fire system inspections can also prevent your business from paying large fees for noncompliance, as stated above. When you perform preventative maintenance on your systems, you mitigate the cost of replacing unmaintained, corroded, or damaged equipment.
What types of fire systems need inspection and maintenance?
Your fire inspection requirements will vary depending on your facility, the state you operate in, and the various fire protection systems within your building. The type of preventative maintenance varies based on the type of fire system. The NFPA and ICC require that these systems receive an inspection regularly as follows:
Fire Sprinkler Systems
These systems require weekly, employee inspections for dry, pre-action, deluge systems gauges, and control valves. Monthly employee inspections for wet pipe system gauges, and alarm valves.
Annual professional inspections are required for specific pieces of equipment. They are required for the building, hanger/seismic bracing, pipes/fittings, and sprinkler heads. Along with information signage, spare sprinkler heads, pre-action/deluge valves, dry pipe valves, and backflow prevention assemblies.
Lastly, they require a 5-year inspection for internal inspection of sprinkler piping, obstructions, and a valve check.
Backflow Preventer Assemblies
Backflow preventer assemblies require a licensed sprinkler inspection company to inspect these systems annually. These inspections ensure your facility’s drinking water is safe and to ensure the sprinkler systems work properly.
Fire Suppression Systems
These non-water based fire suppression systems require a bi-annual inspection by a licensed fire protection technician. These inspections ensure there is the proper amount of clean agent available, the container is pressurized, and there is no damage to the container.
Kitchen Hood Suppression Systems
A licensed fire protection company must inspect your kitchen hood fire suppression systems every 6 months. These inspections are done to ensure your suppression systems will activate in the event of a fire. It ensure they put the fire out and shut off the gas or electricity used to run the equipment.
Routine maintenance is required by a trained employee must inspect the fire alarm components, control panels, power supplies, fuses, LEDs, and trouble signals once a week. They must also inspect the batteries for corrosion once a month. A licensed technician must inspect the initiating devices (heat, smoke, dust detectors) semi-annually. They must also inspect all the fire components and equipment once a year.
Fire extinguishers require monthly inspections to ensure the pressure gauge is on full, the hose is intact, and the pin is secure. A certified professional must inspect the fire extinguishers yearly.
At VFS, we provide inspections, testing, and maintenance of fire sprinklers and fire alarm systems. Our trained personnel conduct all inspections as outlined by the requirements of NFPA. As well as abiding by the local codes that apply to your specific area of operation.
With VFS, your preventative maintenance is top-of-mind. Your inspections will always be up to code and easy to access and schedule with our team!
https://www.vfsfire.com/wp-content/uploads/2021/06/iStock-539329616.jpg14142121The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-06-20 12:59:432021-06-22 13:09:45WHY DOES YOUR BUILDING NEED PREVENTATIVE MAINTENANCE?
When it comes to buildings that contain flammable chemicals, gases, and other materials, fire protection is not something to gamble with. Not only will top-of-the-line fire protection keep your building safe, but it will also ensure that workers remain safe from harm. In this high-risk industry, it is essential that you don’t roll the dice on fire safety measures.
According to OSHA, from 2013 to 2017, 489 oil and gas extraction workers were killed on the job. Getting your fire protection systems in check is like having pocket aces, it sets you up for the greatest success possible. Here are a few tips for you to begin prioritizing your fire safety protocols.
Assess workplace preparedness
It’s essential to start with an inspection of your fire safety. These inspections lead to a greater understanding of your preparedness, and typically reveal vulnerabilities that you were previously unaware of. During this inspection, be sure to look for particular areas that have a higher risk for flash fires and explosions.
You should also be on the lookout for fire equipment that is old or malfunctioning, and be sure to replace them with ones that are in good working condition. Not only should you look for vulnerabilities in your fire extinguishers, but also in your fire sprinkler systems.
A great preventative measure is doing your own monthly visual inspections, as there are developments that can occur between the required NFPA inspections. Grab a notepad, take a walk and canvas your facility looking for any obvious visual deficiencies – corrosion, leaks, obstructions or painted sprinkler heads. With any luck you’re clear of any obvious deficiencies but if you’re not, call your fire protection company (hopefully VFS) to get these assessed and repaired preemptively. A little proactive measure can go a long way to prevent unnecessary accidents and keep your systems working in prime condition.
Ensure emergency equipment is accessible onsite
With workers coming in and out of your facility, it’s important to have a supply of emergency equipment at their workstations and other areas near these stations. The equipment should include materials like fixed and portable fire extinguishers. This helps ensure the safety of your workers, as well as allows your employees to put out a small fire before it begins to spread.
Ensure workers are trained to utilize equipment
In order to ensure your plan is effective, you must train your employees to know what to do in the event of a fire. They should receive instructional materials for the tools they may need to use, as well as participate in training that shows them how to physically use the equipment, and how to exit the building in case of emergency.
Part of this training should include fire drills that help to reinforce the safety procedures and educate your workers on how to exit the building. You should also ensure all evacuation signage and exits are clearly marked, enough to see in the event of a fire.
Utilize detection equipment to measure gas levels
In the oil and gas industry, it is essential to monitor the gas levels throughout your building. Combustible and toxic gas detection systems can help ensure your team avoids activities that may trigger a fire to occur. If a flammable gas goes beyond 10% of the lower explosive level, your workers should refrain from working. Ensure your employees know what levels are acceptable to remain working in, and which gases may be potentially hazardous.
Ensure alert systems are installed to communicate fire risks
Lastly, ensure you have alert systems in place to communicate with your workers regarding the safety hazards throughout the facility. When a fire occurs, employees need to be immediately made aware in order to allow them to evacuate the building/work area safely. Alarm and mass notification systems are needed to alert employees of the danger.
At VFS, your high-risk facility is our top priority. We specialize in providing top-of-the-line fire safety support for special hazard facilities. Our fire and life safety systems integrate every aspect of a building from security systems, to fire protection and suppression to alarm and communication systems. We operate in 35 of the 50 states through our partnerships with local experts.
https://www.vfsfire.com/wp-content/uploads/2021/05/iStock-1097682848.jpg14142121The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-06-13 12:54:212021-06-11 13:55:10High-Risk, High Reward? Not When It Comes to Fire Safety! (Not a Cannabis Reference)
Most people hear the word MIC and are brought back to either a cringy middle school talent show or a late karaoke night.
After reading this article, your second thoughts are going to be, “Oh, Microbiologically Influenced Corrosion.”
Microbiologically Influenced Corrosion (MIC) sounds scary—because it is. The tiny bacteria follow the process of attachment, growth, and dispersal. There are many reasons why preventing MIC is essential for fire and safety security services.
The quick process of MIC will cause massive damage to specific points in the surface, instead of universally and evenly throughout the surface. As a result, there are costly repairs that will set your business back.
The attachment phase needs to be targeted first in prevention. During the attachment phase, free-floating microbial bacteria anchor to a surface within minutes of the encounter and start to produce a polymer film.
Again, within minutes.
The rest of the MIC process is just as crucial to prevent, but harder to catch. Some of the hazards that are threatening your spaces during the MIC process are:
Self-organized highly-structured biofilm starts to rapidly reproduce and grow
Because of the evolution portions, the cells are released to colonize new surfaces
The tubercle starts with the creation of biofilm in the attachment phase
There is a deprivation of oxygen that causes the bacteria to thrive
Highly acidic environments result in a concentrated and accelerated rate of corrosion
This all can lead to pinhole leaks
Sounds fun, right?
The short time frame (of once again, minutes) doesn’t leave any room for mistakes in MIC prevention.
Fear not, because VFS is here to assist in showing that there are daily habits that you can take to avoid Microbiologically Influenced Corrosion.
There are a lot of scientific terms thrown into the paragraphs above, so you may be wondering: what’s the difference between MIC and general corrosion?
Well to sum it up, they’re both bad news.
General corrosion is less significant than MIC because it fails to alter a pipe’s interior surface, causes less damage and repair. While MIC targets concentrated surface areas at a greater force, general corrosion is an even layer, with a slower rate of disintegration.
Both types of corrosion can cause a lot of damage, but focusing on Microbiologically Influenced Corrosion prevention will help your business for the long haul.
WHY IS IT A THREAT?
Well, MIC is primarily an issue of corrosion in both dry and pre-action sprinkler systems.
Corrosion of any type (especially MIC), is a growing concern for anyone with commercial fire protection in place. The aftermath of corrosion is not pretty and a guaranteed out-of-pocket expense. Corrosion might result in:
Production time lost
Increased maintenance costs
Shorter service life
System inefficiency: pipe obstruction, plugging
The worsening quality of system hydraulics
Both dry and pre-action fire suppression systems primarily use compressed air. This, however, is what leads to corrosion. Compressed air is made of both oxygen and moisture. Trapped oxygen within the sprinkler system mixes with water, which reacts negatively with the material of the internal pipes—the perfect environment for MIC bacteria to thrive!
OKAY WE KNOW IT’S A PROBLEM… NOW WHAT?
There are various solutions to the scary “C-word” … aka corrosion. Some of the solutions are more intensive and expensive than others.
Chemical Injections can be included in regular system maintenance, but there are some potential side effects:
It’s very costly
Chemicals can become harmful when exposed
MIC can become immune to the chemicals overtime
Pipe coatings are specifically designed to only work as an option for new construction.
Checking in and doing sprinkler inspections and water analysis is another prevention method that should be adapted. There is Annual Single Bottle MIC testing that has MIC and mineral analysis. Another option is the 5 year, 4 bottle MIC testing and water analysis.
AIR RELIEF VALVES
Air relief valves are doable for most sprinkler systems. Because air travels upward these valves are installed at the highest points of the sprinkler system where they automatically release small amounts of air from the system.
Auto-Air relief valves are the most common solution to prevent MIC. There are multiple reasons they’re the crowd favorite:
Auto-Air Relief valves are reliable because air travels at the top of pipelines and rises in water, which helps maintain proper water pressure and consistent flow.
Automatic venting is a process that happens while the sprinkler system is being filled, where the air travels up and gets trapped. VFS has all of the knowledge and expertise to prolong the life cycle of your sprinkler system.
WE’RE HERE TO HELP!
This all sounds scary, and not as fun as dropping the mic after karaoke.
But remember, that we’re here to help!
At VFS Fire & Security Services, we have over 20 years of experience protecting what matters: people, property, and businesses. We recognize that fire sprinkler corrosion is still a problem many property owners and building managers don’t suspect until it’s too late!
So, get your head start! At VFS, we’re here to help you develop and implement an effective strategy for all of your industrial fire protection needs. Keep your systems in tip-top shape and call us today to see what we can do for you!
https://www.vfsfire.com/wp-content/uploads/2021/06/iStock-1309752465.jpg14142121The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-05-23 16:24:572021-06-22 16:33:54MIC PREVENTION (NOT THE KIND YOU DROP AFTER KARAOKE)
You wouldn’t think fire could stand a chance when surrounded by a body of water—but it does. Boom! It feels like in every action movie ever created, a boat explodes in a bay or on the ocean. Although dramatized, there’s a reality to it. Directors paint the danger picture perfectly!
At VFS Fire & Security Services, we are the drivers of innovation within the fire protection industry, including specialization in marine fire safety. Although most fires seem to look the same in movies, there are a variety of different types of fires that may occur on your vessel. We’re in the business of educating people and keeping them safe when it comes to fire protection, which is why a marine fire safety checklist is necessary for any marine-related organization.
YOUR MARINE FIRE SAFETY CHECKLIST
There is a multitude of boxes to check when it comes to keeping your maritime operations safe and fire-free. We’re providing a comprehensive list to get you thinking about the safety of your marine operations.
CERTIFICATES AND DOCUMENTS
There is a long list of certificates and documents that must be carried on board at all times. This list varies based on region, whether or not your vessel carries passengers, and vessel type.
This list might include a Cargo Ship Safety Equipment or Passenger Ship Safety Certificate, all servicing records including proof of fire extinguisher servicing and pressure tests, a damage control manual, any records of testing, drills, and maintenance, a variety of training manuals, the list goes on! For more specific information on staying up to code and what you need to keep on board, contact our VFS team!
FIRE SAFETY EQUIPMENT
There are hundreds of safety measures in place to prevent fire aboard your vessel, including a handful of safety equipment that must be carried and tests that must be performed. Let’s shoot for smooth sailing, please!
Sprinkler systems: Valves, alarms, pumps, and pressure gauges must be tested and properly working with pipework in fair condition
Ventilators and fire dampers: Must be clean and free of debris with flaps in fair condition
Proper fire detection and fire alarm systems that provide the necessary coverage and protection of assets on board
Properly installed extinguishing systems
Personal equipment, including fire fighting protective wear, self-contained breathing apparatuses (SCBAs), and emergency escape breathing devices (EEBDs)
Properly functioning gas and CO2 systems
Additionally, pathways must be always free of obstruction and clearly marked in the event of an emergency evacuation. Doors must always only be held open by approved methods.
ENGINE ROOM MAINTENANCE
Did you know that approximately 90% of marine fires start in the engine room? This considered, don’t underestimate the importance of routinely checking your engine room’s fire pumps, emergency shutdowns and valves, high-pressure fuel lines, and main zones for proper functionality and cleanliness.
DECK MAINTENANCE AND CREW READINESS
In case of an emergency, your crew should be familiar with the use of these fire protection systems and able to abandon ship if necessary. Fire drills should be performed routinely. Preparation is key for tip-top marine fire safety. As for deck safety, structures in place might include a variety of paint lockers, ventilators, and international shore connections.
Fingers crossed, this equipment doesn’t need to be used! Your emergency equipment, including emergency generators, batteries, pumps, and tankers, however, must be properly maintained, inspected, and ready to be used at any moment.
HERE TO HELP!
While you’re on the water, whether it be for pleasure or work, marine fire safety and preparation cannot be overlooked. Having the right fire safety equipment and performing the right maintenance and routine inspections may be the difference between life and death.
Our VFS team is prepared to get your vessel in tip-top shape with the right marine fire safety equipment. In fact, the VFS Houston Team has been continuing to grow our marine department and has recently acquired four new Tug & Barge Companies—bringing their annual total of vessels to perform fire safety inspections and testing to approximately 375.
With VFS by your side, you’ll be the fire protection talk of the town! Get in touch today to see what we can do for you.
Do you know the benefits of having a reliable alarm monitoring system? Or the potential dangers of not implementing one? With everything that’s been thrown our way in the past year, you should have at least one reliable system in your life: a reliable alarm system!
The ongoing global coronavirus pandemic, Australian Bushfires, and Hurricane Laura across the Midwest, 2020 showed us the importance of being prepared against natural disasters. I mean, really, this past year made us expect the unexpected!
Despite the uncontrollable nature of these events, we’re pushed to remember the importance of investing in the health and safety of our organizations. Is your fire alarm monitoring reliable and ready to take on whatever comes its way? If it’s MeshWrx, it is!
There are lots of options when it comes to fire alarm monitoring services. We know, it can be overwhelming. But MeshWrx makes it easy! Here’s a rundown of what our reliable alarm systems look like.
WHAT IS THE MESH NETWORK DIFFERENCE?
Did you know that mesh network technology was originally developed for demanding military communication pathways? Talk about reliability! Today, mesh networks are still trusted by military, fire, and police departments. Simply put: Mesh networks are the crème de la crème of reliability.
But what is a mesh network system? Wireless mesh networks consist of a collection of wireless routers that provide network access to clients, typically in commercial buildings. These specific mesh routers act as entry points to reliable and established central monitoring stations.
Mesh network alarm monitoring systems were designed with the intent to be reliable, cost-effective, and hassle-free. And that’s exactly how they operate today.
Traditional, low-tier alarm systems and other single-route systems are widely susceptible to environmental disturbances and even equipment problems.
For example, a cellular alarm system uses local cellular service to relay fire alarm signals from the building to the nearest cell tower. The signal is then relayed to an internet gateway by point-to-point microwaves or fiber optic cables. Once it is on the internet, it is routed to the central monitoring station.
A traditional alarm system only shares a percentage of the reliability of a mesh network system and experiences more dead spots. And as far as reliability is concerned, cellular networks do have a single point of failure, which may cause issues. If any part of the communication system goes down, the communication link is broken.
It’s a lengthy process to contact the help you need—up to 45 seconds in some cases. In a situation like this, every second matters. And think, how many times have your cellular calls dropped or failed? Do you really want to be relying on the quality of a cell phone tower?
On the opposite side, mesh networks are continually optimizing a variety of signal pathways to get theirs through to the help you rely on most. With our network of towers, you never have to worry about the reliability of your signals getting through to the central station. We’ve got your back!
HOW ABOUT A REAL-LIFE EXAMPLE?
Do you remember Hurricane Harvey? Way back in 2017? The aftermath of this category 4 hurricane was devastating—with catastrophic flooding that resulted in over 100 deaths. But did you know that mesh technology was the only uninterrupted source of communication during this natural disaster?
Landlines, IP, and cellular all crashed during this emergency, but not their mesh network system. And that’s the MeshWrx difference.
A HANDY LIST OF BENEFITS
If you’re still not convinced of the reliability of a mesh network system, 1) we’re surprised and 2) let us help you. Here are some additional reasons as to why a MeshWrx alarm system might be right for you.
Prevent property damage
Communicate with professionals at top speed
24-hour protection and reliability
And the greatest benefit of all? The sense of comfort and security you gain when choosing MeshWrx. Choosing MeshWrx fire alarm monitoring gives you an ‘out of sight, out of mind’ mentality.
You can be more productive, safe, and focused on the work at hand, knowing that you and all members of your organization are safe.
Your employees will exhale a sigh of relief knowing that if a fire were to occur, emergency responders would be notified immediately and that they could proceed to safely exit the building.
IS YOUR ALARM RELIABLE?
Whatever your industry, from education to healthcare, we have a one-stop fire alarm monitoring solution that will give you confidence and peace of mind. You don’t want to be wondering if your alarm system is up to the task when an unexpected emergency hits. You need to ensure your alarm system is reliable and up for the challenge.
Mesh networks provide a holistic approach to ensuring your alarm monitoring needs are met and are trusted by the demanding military, police, and fire communication pathways.
Because when it comes to the safety of yourself and your organization, being out of style isn’t cute. Mesh networks are the future of alarm monitoring systems. Don’t be ‘that guy.’ Instead, stay prepared, stay safe. Contact MeshWrx today to see how we can help your company’s fire protection systems thrive!
https://www.vfsfire.com/wp-content/uploads/2021/05/DO-YOU-HAVE-A-RELIABLE-ALARM-SYSTEM-.png10801080The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-05-02 16:12:292021-06-22 16:16:39DO YOU HAVE A RELIABLE ALARM SYSTEM?
Facilities managers, ensuring you have top-of-the-line alarm monitoring systems throughout your facility is essential. Traditional alarm systems just won’t cut it anymore. It’s time to cut the cords. Mesh alarm monitoring systems are designed to make alarm systems more reliable, cost-effective, and fast.
What is MeshWrx?
MeshWrx was created from the experience that VFS Fire & Security Services had in making sure our clients fire safety was top-of-the-line. VFS has continually developed industry-leading technology that complements our services to provide the best customer experience in the fire and life safety industry.
Our CEO, Randy Nelson, recognized a need to deliver a more reliable fire and life safety monitoring system in the market. He invested in technology to impact life-saving communication and, thus, MeshWrx was born! Contact us today to see how our MeshWrx systems can help your company!
What are mesh network alarm monitoring systems?
Mesh network alarm monitoring systems were designed to be reliable, cost-effective, and hassle-free. Traditional tower-based solutions and other single-route systems can be affected greatly by environmental disturbances and equipment problems and interrupted more frequently with more dead spots than mesh network systems. Mesh networks continually optimize multiple signal pathways to find a way to send a signal.
When Hurricane Harvey hit in 2017, mesh technology was the only uninterrupted communication source. All landlines, cellular, and IP failed during this emergency. When an emergency occurs you need to ensure your alarm systems are up to the task of communicating to the outside. Mesh networks provide a holistic approach to ensuring your alarm monitoring needs are met.
The networks were originally built for the demanding military, police, and fire communication pathways. The radio frequency’s quick response times and reliability have proven to be the most effective choice in protecting lives and property. MeshWrx has created a solution for facilities managers to get the greatest reliability based on industry standards and the fastest method available in the industry for fire alarm monitoring.
Why do you need a mesh network alarm system?
Prevent Property Damage
Top-of-the-line alarm monitoring systems respond when they detect the slightest amount of smoke, which allows the fire department and those in the building to respond as quickly as possible. Quick response times help you ensure that smoke doesn’t turn into a large fire.
COMMUNICATE WITH THE FIRE DEPARTMENT QUICKLY
Quick response is essential to saving your building and your people. The alarm monitoring system you choose needs to be able to communicate quickly and consistently with the fire department. Instead of worrying about calling and reporting the fire, people inside can focus on evacuating the building and helping those in need.
24-HOUR PROTECTION AND RELIABILITY
When you install a mesh alarm monitoring system your building remains protected 24/7. You can ensure your building is protected when people aren’t in it. With mesh network systems, you can feel at ease that your building is safe especially during an emergency.
Cellular and IP systems tend to slow or drop as more users are added to the system. MeshWrx’s performance is actually improved when more users are added. Mesh networks create multiple pathways for an emergency signal to reach first responders.
MOST IMPORTANTLY, IT KEEPS YOUR EMPLOYEES SAFE
Lastly, and most importantly, installing an alarm monitoring system ensures your employees remain safe. It’s important your employees know that they can safely exit the building when a fire occurs, as the alarm system will notify emergency responders.
https://www.vfsfire.com/wp-content/uploads/2021/05/FACILITIES-MANAGERS-JUMP-INTO-THE-MESH-PIT-.png10801080The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-04-11 14:38:412021-06-22 16:01:12WHY YOU NEED MESHWRX IN YOUR BUILDING FACILITIES MANAGERS! JUMP INTO THE MESHPIT
THE FOAM ON THE TOP OF YOUR GUINNESS SHOULDN’T BE THE ONLY THING YOU’RE WORRIED ABOUT THIS ST. PATRICK’S DAY
Your needs as a business owner vary on the type of building you own. You’ve likely heard and implemented many fire protection systems, but do you know the key differences between a fire sprinkler system and a fire suppression system? It’s important to understand these differences.
CLEAN AGENT FIRE SUPPRESSION SYSTEMS
These fire suppression systems utilize environmentally-friendly chemical reagents to put out fires. These are typically found in sensitive areas, such as a data center. The chemicals used are water-free and safe for the environment. Once a clean agent system activates, the clean-up is minimal.
CARBON DIOXIDE FIRE SUPPRESSION SYSTEMS
These systems use CO2 colorless, odorless gas to extinguish a fire. This option is an incredibly efficient and cost-effective approach to fire protection. The clean-up after the system has been activated is minimal.
Industrial plants need extra attention when it comes to fire protection, as most of the areas are in high-hazard environments. The fires that occur in these areas typically involve some type of chemical, liquid fuel, or other hazardous materials, therefore proper fire protection systems are essential. These systems typically use dry chemicals to extinguish the fire.
RESTAURANT FIRE SUPPRESSION SYSTEMS
When you’re at the pub this St. Patrick’s Day (virtually or with a mask on) you’ll find that in the kitchen there are specific fire suppression systems. (We know you won’t notice, because you’ll be singing along to Sweet Caroline with a Guinness in hand- and we don’t blame you, we’ll be doing the same.)
However, those fire suppression systems are essential to keeping you and your drunk counterparts from going up in flames! These suppression systems extinguish fires fueled by grease in a kitchen environment. They typically utilize wet chemicals in a mist form to extinguish the fire quickly and effectively.
Fire protection systems needed for high-hazard areas are among the most technical and specialized fire equipment systems. At VFS, we pride ourselves on being a renowned leader in the special hazards sector.
Our founder and CEO, Randy Nelson, sits on the technical committee for NFPA 16 (Code Standard for the Installation of Foam-Water Sprinkler) and understands just how critical proper installation and maintenance is on these specialized systems. We bring our robust knowledge, expertise, and experience to find the safest and most reliable solution for every unique need and environment your building has!
https://www.vfsfire.com/wp-content/uploads/2021/05/WHAT-YOU-NEED-TO-KNOW-ABOUT-FIRE-SUPPRESSION-SYSTEMS-.png10801080The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-03-14 14:28:152021-06-22 14:33:29WHAT YOU NEED TO KNOW ABOUT FIRE SUPPRESSION SYSTEMS
What happens when an emergency occurs in your building? Will people be able to communicate outside the building for help? Will they be guided to safety? Can the occupants dial 911 from their cell phones?
It’s important that first responders are able to communicate with other emergency responders outside of the building. As a building owner, it is your responsibility to manage evacuation, communication, and signal systems.
Buildings are typically composed of materials that inhibit cellular and other communication signals. In order to boost signals within your building and ensure public safety compliance, you can utilize ERRCS systems.
WHAT ARE ERRCS?
An Emergency Responder Radio Communication Systems (ERRCS) is a required standard for most buildings. ERRCS is a building communication system that improves communication within the building to those outside. This extension of the public safety network utilizes small antennas called Distributed Antenna Systems (DAS) that receive and transmit radio signals from the first-responder network.
These ERRCS systems are composed of various components that ensure they are working efficiently and effectively. A Bi-Directional Amplifiers system is integrated to connect the smaller antennas to the donor antenna. This antenna then transmits and receives radio frequencies from the public safety network.
ERRCS IS NOT REQUIRED FOR EVERY COMMERCIAL BUILDING. HOW CAN YOU DETERMINE WHEN YOU NEED TO INSTALL ERRCS?
Start by checking your local jurisdiction to see if there are ordinances in place that relate to public safety communications. The general requirements for all buildings is that public safety radios must work in the building. If public safety radios are tested and work successfully, especially in critical areas like stairwells, electrical rooms, mechanical rooms, and elevators, then you will not be required to install an ERRCS.
It’s important to understand what might block these signals before you hire someone to test your communication capabilities. Exterior walls and glass are just the beginning when it comes to potential signal blockages. Interior walls, office furniture, equipment, and people can also impact signal transmission.
WHEN ARE ERRCS REQUIRED?
There are various requirements for installing ERRCS in your commercial building. Here are a few of the common requirements you need to be aware of.
Buildings that have 3 or more stories, are 50,000 square feet in area, or have underground parking require the installation of ERRCS. Buildings with complex layouts have a challenging time keeping the signal strength in all areas of the building.
Challenging layouts typically include thick walls and multi-room floors. If your building is made up of metal, concrete, brick, wood, or Low-E glass, the signal may be blocked or disrupted. In order to remain in compliance with IFC regulations, you must ensure the RF signal is amplified in all areas of the building.
It’s important to ensure your Federal Communications Commission licensed radiotelephone transmitters are adjusted, maintained, and repaired up to code. These services require special training, so it’s important that you hire a trusted resource to perform inspection and maintenance on your equipment. Our experts at VFS are trusted to ensure our clients remain in compliance and up to code.
It is essential that your ERRCS work cohesively with your fire protection systems. In order for the two to work together, you need to implement paging systems. Paging systems help announce instructions to building occupants to ensure their safety.
In order to remain in compliance with ERRCS requirements, a building must have a 95% majority of minimum signal strength of -95 dBm. This level is a standard in emergency responder communication systems. In order to ensure this requirement is met, you may need to boost the signal through DAS or other signal boosters.
Annual testing and maintenance are required to ensure standards are met and any interference is kept to a minimum. VFS is licensed and certified to help your building remain in compliance with these testing and maintenance requirements.
Battery back-ups are required in case of power outages. When an emergency occurs, the power may need to be cut off to all parts of the building. When your back-ups are reliable, you ensure your emergency systems are running when you need them most.
Do you know if your building requires ERRCS to be implemented? If not, our experts can help! Contact our team today to see how we can help your building remain compliant and, more importantly, safe!
https://www.vfsfire.com/wp-content/uploads/2021/05/5-THINGS-CRE-OWNERS-SHOULD-KNOW-ABOUT-INSTALLING-ERRCS-.png10801080The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-02-28 13:36:512021-06-22 14:11:425 THINGS CRE OWNERS SHOULD KNOW ABOUT INSTALLING ERRCS
Great Scott! It’s time to bring your alarm monitoring systems back to the future. Mesh network systems are the Delorean ready to bring your systems up to speed with the times.
Choosing mesh technology to support your alarm monitoring system needs means choosing reliability, speed, and convenience. Your antiquated alarm monitoring systems just won’t cut it anymore.
HOW CAN MESH ALARM MONITORING SYSTEMS HELP YOUR BUSINESS?
Mesh network monitoring systems are unlike any tower-based, single-route systems. The mesh wireless technology is resistant to environmental disturbances and equipment problems. The multiple signal pathways allow for the alarm monitoring systems to remain in service for your building.
Mesh networks communicate with alarms in under three seconds. A traditional telephone line, cellular, or IP can take up to 45-60 seconds. That extra time could be the difference between life and death for your employees.
With mesh network systems, you don’t have to worry about slow or dropped connections. While cellular and IP systems slow and even sometimes drop when users are added to the systems, MeshWrx’s performance is improved. Radio mesh network technology creates multiple paths for an emergency signal to reach first responders. The self-configuration and smart routing results in 100% uptime.
Cellular and IP equipment requires consistent upgrades in order to ensure your technology does not become obsolete. With mesh technology, once installed, you don’t have to worry about it anymore.
Not to mention the money you can save by installing mesh networks. Your current system may be costing you a small fortune. Monthly costs for traditional alarm monitoring systems are increasing as quality and reliability are decreasing.
Increased service calls and time spent tracking down issues are additional costs incurred with outdated systems. With MeshWrx, we eliminate the cost of expensive phone lines, don’t require upgrades, and instead provide more reliable technology.
“Over the years we have had continued service issues and problems with our fire alarm monitoring telephone liens for our facilities in Southern California, and the cost and fees for phone lines have also increased year over year. By canceling our monthly fire alarm and security telephone lines services and going with MeshWrx monitoring, our organization is saving over $40,000 annually with superior technology, equipment, and service.”
-Josh Harvey, Manager of Information Systems at Armstrong Garden Centers
https://www.vfsfire.com/wp-content/uploads/2021/05/BRING-YOUR-ALARM-MONITORING-SYSTEMS-BACK-TO-THE-FUTURE-.png10801080The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2021-01-31 13:14:042021-06-22 13:19:50BRING YOUR ALARM MONITORING SYSTEMS BACK TO THE FUTURE
https://www.vfsfire.com/wp-content/uploads/2021/05/Better-Safe-than-Sorry.png10801920The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2020-11-15 11:56:492021-06-23 12:01:05How to properly prepare for a fire disaster (Not like Dwight Schrute)
While Billy Joel’s We Didn’t Start the Fire is an extremely catchy tune, it’s not something you want to hear as a building manager. It’s important to have all the fire protection systems in place to ensure your building’s safety. Fire prevention should be your main priority.
Having all the important precautions in place is important, but you also need to understand why fires start in commercial buildings. Here are the top 5 causes of commercial fires, so you can be prepared when you need it most.
One of the most common causes of fires in commercial buildings are cooking fires. Any business that has a kitchen area is susceptible to cooking fires. Some of these fires begin by human error, while others stem from appliance malfunction. Your kitchen should be considered a high-risk zone and should be adequately protected with sprinkler systems, alarms, and fire extinguishers.
Here are a few of the leading commercial buildings affected by cooking fires:
64% of fires in healthcare facilities are related to cooking.
61% of fires in restaurants are related to cooking.
38% of fires in educational institutions are related to cooking.
29% of fires in office properties are related to cooking.
13% of fires in stores and mercantile properties are related to cooking.
Heating equipment-related fires
During colder months, most commercial buildings require additional heat in order for workers to remain comfortable. The equipment required to keep your building warm is susceptible to overheating and starting fires. This equipment might include central heating units, fireplaces, water heaters, and other heating appliances. Heating equipment accounts for 14% of fires in industrial/manufacturing properties and 11% of fires in office buildings.
Electrical and lighting equipment
Any electricity within your building carries inherent fire risks. Electrical fires can occur with overloaded circuits, loose connections, faulty fuses, imbalanced electrical loads, and other electrical and lighting problems.
Most electrical fires stem from older buildings’ electrical wiring. However, it is important to stay proactive and have your new building inspected. You should also perform preventative maintenance annually.
Intentional fires account for 10% of fires that occur in commercial buildings. These fires tend to cause the most damage and unfortunately, result in the most civilian injuries and deaths.
It is important to implement active fire safety measures and include fire safety in areas that may seem uncommon. These fires typically occur in bathrooms, trash bins, garages, or open areas like a lawn or field.
Human error and unexpected fires account for about 10% of fires started in commercial buildings. Unplanned fires happen. They may stem from a variety of situations. For example, employees may leave a space heater on or plug too many things into an extension cord.
While you can’t stop carelessness, you can implement proper employee training programs. These programs help educate your employees on how to prevent fires and put them out when they do occur.
At VFS, we are dedicated to ensuring that your building and your employees remain safe from harm. We partner with our clients to develop the best fire protection solutions and safety training based on your business’s specific needs. Fortify your building, protect your employees and gain the peace of mind you deserve knowing that VFS is protecting your business.
“Run like hell” is not a fire safety protocol. For large corporations, organization is key. For both the safety of your employees and your building, you must prioritize implementing proper fire safety protocols. We’ve put together our top 5 tips for improving fire safety in your building.
PERFORM A FIRE ASSESSMENT AND CRAFT THE PERFECT FIRE SAFETY PLAN.
Fire risk assessments should be regularly scheduled to ensure your business has the necessary processes and procedures in place in case of emergency. This assessment will likely include identifying fire hazards, evaluating and reducing the risk, and crafting a plan.
You likely have an old plan, created by a far-off company and tucked away in a drawer, never to be seen again. This is also not a great fire safety protocol. For the plan to work, everyone needs to know what the plan is. Be sure to run drills periodically throughout the year. All employees should share problems that arise in those drills with management to avert problems in a real emergency.
Your fire safety plan should include employee education, fire escape routes, fire drill, and a plan to ensure that all team members have an evacuation plan that fits their needs. The plan should be detailed and robust, to ensure you are prepared for anything that may come your way!
IMPLEMENT THE PROPER TECHNOLOGY.
We don’t just mean fire extinguishers placed randomly around the office. This means fire detection and alarm systems that can overcome potential loss of power, emergency lighting to guide your team in the dark, industrial fire sprinkler systems to help prevent the spread of a fire, and monitoring to alert the authorities to your emergency. Having the proper technology in place will allow your team to stay safe and your building to come out with limited damage.
DISPLAY SIGNAGE TO HELP LEAD YOUR TEAM TO SAFETY.
Communicate proper health and safety information through illuminated signs, which can include fire safety warning signs, fire-fighting equipment signs, and marking dangerous substances. Be sure the signage is easy to ready and communicates the message clearly.
IT’S NOT JUST ABOUT THE FLAMES… DON’T LET YOUR BUSINESS GO UP IN SMOKE.
Smoke can be just as deadly as flames if your building has a fire. Be sure to have the proper equipment in place, like smoke and fire curtains, to limit the spread of smoke damage as well as the damage caused by fire.
MAKE SURE YOUR STAFF IS EDUCATED.
Imagining worst-case scenarios is not just for Sci-Fi TV writers… While it can be easy to forget to address the real dangers of fire when you haven’t experienced it, this can be a business’ greatest downfall. Ensure you give your employees annual fire safety training to teach them about the common causes of workplace fires. Address how to prevent a fire, and what to do if a fire takes place in the workspace.
“Run like hell” doesn’t have to be your fire safety protocol. Take these steps to improve your office’s fire safety. Want to know more? Contact us today!
https://www.vfsfire.com/wp-content/uploads/2020/10/RUN-LIKE-HELL-IS-NOT-A-FIRE-SAFETY-PROTOCOL-.jpeg14142119The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2020-10-05 11:06:052021-06-22 11:15:22“RUN LIKE HELL” IS NOT A FIRE SAFETY PROTOCOL
https://www.vfsfire.com/wp-content/uploads/2021/06/iStock-637509686.jpg15002000The VFS Teamhttps://www.vfsfire.com/wp-content/uploads/2021/07/VFS_logo_signature_White_7.1.21_RGB-1030x346.pngThe VFS Team2017-08-01 12:34:362021-06-23 12:37:08WITNESS, INTERACT & EXPERIENCE THE LATEST IN FIRE TECHNOLOGY
Dry and pre-action systems are the world’s second most common type of fire suppression system. With increasingly widespread use of these systems, the issue of corrosion has become very common. Internal corrosion of dry and pre-action fire suppression systems is a growing concern for the fire sprinkler industry. Corrosion in these systems causes failures resulting in property damage, production downtime, and increased maintenance costs. Additionally, corrosion impacts system hydraulics and reduces the efficiency of fire sprinkler system designs. Historically, dry and pre-action fire suppression systems have used compressed system air as the primary supervisory source. Compressed air, however, contains both oxygen and moisture promoting a corrosive system environment.
Approval agencies, design engineering firms, and component manufacturers have teamed up to investigate the main cause of corrosion in fire sprinkler systems. Recent testing shows the removal of Oxygen in both wet and dry pipe fire sprinkler systems can extend the life cycle of the systems by as much as 3-6 times.
Based on the test results, venting wet fire sprinkler systems and using Nitrogen in dry and pre-action systems will give you the maximum life cycle for your system components. The recent NFPA 13 code change for 2016 requires the venting of wet pipe fire sprinkler systems. This can be accomplished by manually or automatically venting of oxygen. The approval agency FM is now aware of the benefits of reduced oxygen in both wet and dry fire sprinkler systems to the point of restricting the use of air compressors and requiring wet systems to be vented.
Because of the strong need for corrosion protection sprinkler systems, Potter Electric Signal Company conducted a test comparing the effects of using 98% pure nitrogen gas compared to compressed air systems. The systems were half filled with water and then allowed to sit for 12 months. After 12 months the systems were tested and it was found that:
The use of 98% nitrogen in lieu of compressed air as a supervisory gas reduces corrosion in both galvanized and black steel systems regardless of whether or not trapped water is present. The corrosion reduction potential ranges from 48% to 91% when compared to compressed air.
Using 98% nitrogen gas in lieu of compressed air increases the life expectancy of a dry or pre-action system on an average of 5.3 times.
The use of galvanized steel instead of black steel results in higher metal loss rates when compared in equivalent environments.
The use of 98% nitrogen gas in a relatively dry, black steel environment has the lowest corrosion rate overall.
Based on these results, using nitrogen gas for fire protection systems will help increase the life of the system by causing less corrosion.
For more information on nitrogen gas use for fire protection systems, please contact VFS today!
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Google Analytics Cookies
These cookies collect information that is used either in aggregate form to help us understand how our website is being used or how effective our marketing campaigns are, or to help us customize our website and application for you in order to enhance your experience.
If you do not want that we track your visit to our site you can disable tracking in your browser here:
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
The following cookies are also needed - You can choose if you want to allow them: